AUTOMOTIVE PRODUCTS

Country:
CAN Bus Modul für Fernlicht

CAN Bus module for high beam

Recommended for vehicles with factory LED and Xenon high beam

Product number: 208-270417

Description

With modern headlights with LED or xenon technology, it is often difficult or impossible to pick up a control signal for the high beam. In these cases, it is advisable to determine this signal not from the main headlight but from the CAN bus. Our adapter is used for this. By connecting to the CAN Low and Can High cables and creating a power supply for the adapter, the module determines the high beam function and outputs this via the violet cable.
This signal is then used as a control signal for a conventional relay circuit.
The box is supplied with a corresponding connector and a 5-wire cable (approx. 10cm).
Additional cable material is required for the wiring within the vehicle (power supply, ground, can low, can high and output line to the relay).
The installation instructions can be accessed directly via a QR code located on the box. After scanning the QR code, you can easily search for your vehicle and get access to the corresponding English installation instructions.
The signal codes for a large number of different vehicles are programmed into the box.
Please note the attached compatibility list to ensure that your vehicle is already taken into account when programming the adapter.

Documents

Questions

Reviews(0)

Questions