AUTOMOTIVE PRODUCTS

Country:
TJM Fahrwerk für Isuzu D-Max 2020+ Ausführung Front Stage I & Heck Stage III

TJM Suspension for Isuzu D-Max 2020+ Version Front Stage I & Rear Stage III

Optimized for 0 to 50 kg front and over 450kg rear permanent payloads

Product number: TIS0130ISD

Description

The TJM suspension is not just a simple suspension lift, but also allows different spring and damper designs to be adjusted to the individual requirements of the L200. In addition to the suspension adjustment with regard to different additional axle loads due to possible attachments or permanent loading, a moderate height increase of approximately 30 mm is achieved. Two different suspension designs are available for the front axle. The Stage I design is optimized for vehicles with no or only slight additional loads of up to 50 kg. Stage II, on the other hand, is reinforced for additional loads of more than 50 kg.) Three different chassis designs are available for the rear axle. Stage I is designed for an additional load of 0 to 250 kg, Stage II for 250 to 500 kg and Stage III for over 500 kg. The robust XGS Nitro shocks are used as dampers. The generous dimensioning of the shocks with 40 mm cylinder, 1.6 mm wall thickness and with a 20 mm piston rod not only ensures stability but also significantly improves cooling performance. The XGS series suspension elements, which are precisely matched to the L200, ensure a high level of suspension comfort both off-road and on-road. The suspension kit contains in each case the leaf springs, coil springs dampers for the front and rear axle. Also included for the leaf spring suspension are poly bushings, greasable shackles and greasable bolts. The TJM chassis is supplied with a TÜV certificate, so that nothing stands in the way of the TÜV demonstration.

Enquiries from Germany, Austria and the Czech Republik please contact your authorised Isuzu Dealer.

Questions

Reviews(0)

Questions