AUTOMOTIVE PRODUCTS

Country:
Nissan Navara NP300 / Aluminum Wheel Spacers 60 mm per axle

Aluminium wheel spacers 46mm per axle

1 set ( 4 pieces ) wheel spacers Suzuki Jimny GJ/HJ

Product number: SPV-5066670

Description

Suitable for the Suzuki Jimny GJ we offer wheel spacers 23 mm and 28 mm per side, which are optimally adapted to the vehicle. Other dimensions can be requested.
 
The thickness of the wheel spacer can be selected according to the standard rims and tyres used, so that in most cases the existing wheel cover is sufficient. 
 
Mounting advice: 
 
According to current EU legislation, the entire wheel including the wheel bead must be covered, so an additional wheel cover is a condition of the parts certificate and is usually required by the expert.
We offer our optional mudguard lips as a solution for this.
A simple inspection according to §19 para. 3 is to be carried out.
 
In the case of special combinations (e.g. special wheels which are not listed in the certificate), an inspection must be carried out in accordance with §21 or 19 Para. 2. When combining with special wheels, the wheel cover, clearance and the maximum permissible track width change of 4% must be observed. A combination of aluminium wheel spacers and steel rims is not recommended.
 
The wheel spacer is manufactured with nut centring. The wheel spacer is fixed to the vehicle hub with the supplied fixing nuts. 
 
In offset bolt circles, studs are pressed into the wheel spacer, on which the rim is fastened with the original fastening material. The use of our wheel spacers with rims or tyres deviating from the standard equipment is also possible and regulated in the TÜV parts certificate, e.g. 205/75 R15 or 215/75 R15 in combination with the standard rim.
 
The use of wheel spacers in different thicknesses, e.g. front axle 23 mm per side and rear axle 28 mm per side, is often necessary because the wheel coverage is often smaller on the front axle. This combined use is regulated by the TÜV. 

Documents

Questions

Reviews(0)

Questions

Please choose an option