AUTOMOTIVE PRODUCTS

Country:
Nissan Navara NP300 / Aluminum Wheel Spacers 60 mm per axle

Aluminium wheel spacer VA 46mm / HA 60mm per axle / increased load capacity of 1250 kg per wheel

Isuzu D-Max from 2012 on / set for the 2 axles

Product number: SPV-7127039N
shipping Delivery time approx. 3-4 weeks

Description

Isuzu D-Max ex 2012 track widening VA 46mm / HA 60mm per axle (23 mm / 30 mm per side). A double centering of the widening allows the best possible concentricity. The wheel spacer is attached to the vehicle hub with the supplied fixing nuts. With the original mounting material, the rim is then attached to the studs which are pressed into the wheel spacer. A wheel spacer with tyres or rims different from the standard equipment is no problem. This is as well as the use of different thicknesses (e.g. front axle 23mm per side and rear axle 30 mm per side) which is often necessary and regulated in the TÜV- part certificate.
 
With a track widening you do not only upgrade the appearance of your Isuzu D-Max but you also get other advantages like:
 
  • greater cornering stability
  • improved straight-line stability
  • Increased off-road capability
  • TÜV-certified
  • Easy mounting
 
Many of the wheel spacers for pickup trucks available on the market have load releases of approximately 1800 kg per axle. Since the standard D-Max already has a maximum rear axle load of 1870 kg or as a loaded vehicle of 2805 kg, a TÜV demonstration automatically results in an unpleasant reduction of the permissible total weight.
Our track widening has an extreme load release of 2500 kg per axle (1250 kg per track plate) and is the right solution for the D-Max.
 
Mounting instruction: 
Since the current EU legislation requires the entire wheel to be covered, including the wheel bead, an additional wheel cover is a requirement of the parts certificate and is usually requested by the expert.
For this we offer our fender lips as an optional solution.
A simple acceptance test must be carried out in accordance with §19 Section 3.
In the case of custom combinations (e.g. special wheels that are not listed in the TÜV certificate), an TÜV approval must be carried out in accordance with §21 or 19 para. 2. When combining with non-standard wheels, the wheel cover, clearance and the maximum permitted track width change of 4% must be observed. A combination of aluminium track widenings and steel rims is not recommended. 

Documents

Questions

Reviews(0)

Questions

Please choose an option